ARRI SkyPanel S120-C LED soft light

Call for price

AVAILABLE

Category: Tag:

ARRI SkyPanel S120-C, Soft Lighting | Redefined

ARRI SkyPanel S120-C is a smaller brother of a S360-C light fixture at third of its size. At the same time S120 is twice as long as the S60, but weighs nearly the same. SkyPanel S120-C is fully colour tuneable, allowing output of a warm 2800K to icy blue 10,000K light. This light fixture outputs equivalent of 2000W tungsten soft light while drawing a maximum of only 430W.

SkyPanel S120-C achieves over 85% of the colours within the Rec 2020 colour space, allowing user to create the look and exact colour on the set.

Series: SkyPanel
Model: S120-C
Optical System: Soft Diffusion Panel
Light Aperture / Lens Diameter in mm: 1290 x 300 mm
Light Aperture / Lens Diameter in inch: 50.8 x 11.8″
Beam Angle: 110° (Half Peak Angle)
Weight in kg net*: Manual Version: approx. 16 kg / Pole Operated Version: approx. 19 kg / Center Mount Version approx.: 14 kg
Weight in kg packed*: Manual Version: approx. 26 kg / Pole Operated Version: approx. 29 kg / Center Mount Version approx.: 24 kg
Weight in lbs. net*: Manual Version: approx. 35 lbs / Pole Operated Version: approx. 43 lbs / Center Mount Version approx.: 31 lbs
Weight in lbs. Packed*: Manual Version: approx. 57 lbs / Pole Operated Version: approx. 65 lbs / Center Mount Version approx.: 53 lbs
Measurements (HxWxL) incl. Pin in mm*: Manual Version: 588 x 1467 x 133 mm / Pole Operated Version: 615 x 1439 x 133 mm
Measurements (HxWxL) excl. Pin in mm*: Manual Version: 473 x 1467 x 133 mm / Pole Operated Version: 500 x 1439 x 133 mm
Measurements (HxWxL) incl. Pin in inch*: Manual Version: 23.1 x 57.7 x 5.2″ / Pole Operated Version: 24.2 x 56.6 x 5.2″
Measurements (HxWxL) excl. Pin in inch*: Manual Version: 18.6 x 57.7 x 5.2″ / Pole Operated Version: 19.7 x 56.6 x 5.2″
Measurements (HxWxL) Packed size in mm*: 500 x 1500 x 300 mm
Measurements (HxWxL) Packed size in inch*: 19.7 x 59.1 x 11.9″
Handling: Aluminium Yoke, High-Strength Tilt Lock / Steel Yoke, Pole Operation for Pan & Tilt / Center Mount Yoke
Mounting: 28 mm Spigot (Junior Pin)
Tilt Angle: +/- 90°
Lamphead Voltage Input: 48 V DC
Power Consumption: 400 W Nominal, 430 W Maximum
Lamphead Power Connection: Male 3-Pin XLR – 15 Amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector: Male 4-Pin XLR – 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range: 23 to 36 V DC
Battery Mode Light Output: 50 % of total output
White Light: 2,800 K to 10,000 K continuously variable correlated color temperature
Coloured Light: Full RGB+W Colour Gamut with Hue and Saturation Control
Colour Temperature Tolerance: +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Colour Rendition: CRI Average > 95, TLCI Average > 90
Green-Magenta Adjustment: Continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming: 0 to 100 % continuous
Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
Wireless Control: Not integrated, via SkyLink
Remote Device Management (RDM): DMX Setup, Hour Counter and Standard RDM Commands
Software / Mini-USB Interface: Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software Upgrade via flash drive
Housing Colour: Blue/Silver, Black
Ambient Temperature Operation: -20 to +45° C (-4 to +113° F)
Protection Class / IP Rating: III / IP 20
Estimated LED Lifetime (L70): 50,000 hours
Estimated Color Shift Over Lifetime (CCT): +/- 5 %
Certifications: CE, CB, ENEC, cNRTLus, FCC, PSE
Power Supply Unit: S60/S120 PSU
Power Supply Input Range: 110 to 240 V ~, 50/60 Hz
Power Supply Output Range: 48 V DC
Power Input Connection: powerCON TRUE1 (Bare Ends / Schuko / Edison)
Power Output Connection: Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight in kg: approx. 4 kg
Weight in lbs: approx. 8 lbs
Measurements (HxWxL) in mm*: 91 x 191 x 383 mm
Measurements (HxWxL) in inch*: 3.6 x 7.5 x 15.1″
Control: On-Board On/Off Switch
Mounting: SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
Certifications: CE, CB, ENEC, cNRTLus, PSE

Note*Weight and dimensions are rounded values. **Center Mount