Used Sony BVM-E170 16.5" Full-HD Reference OLED MonitorUsed Sony BVM-E170 16.5" Full-HD Reference OLED Monitor

Ex-Demo Sony BVM-E170 16.5″ Full-HD Reference OLED Monitor

Call for price

Category: Tag:

Please note this is an Ex-Demo Sony BVM-E170 16.5″ Full-HD Reference OLED Monitor. ES Broadcast carefully tests all ex-demo equipment prior to sale, and offers a six-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

Trimaster EL OLED Master Monitor

If you require a monitor for professional applications such as Camera Control, High-End Editing, Broadcasting or On-set Shooting Sony BVM-E170 would be a perfect choice.

Thanks to its edge Organic Light Emitting Diode (OLED) technology you can rest reassured that you will get outstanding performance with Sony BVM-E170.

With state-of-the-art Super Top Emission technology, this monitor will deliver outstanding black performance combined with quick response with minimal motion blur and wide colour gamut.

Combining new 12-bit output digital signal processing engine provides a nonlinear cubic conversion colour-management system which delivers precise colour reproduction, excellent uniformity of display, gamma performance and picture quality consistency.


  • Super Top Emission OLED display panel
  • Superb picture quality
  • Accurate Black reproduction
  • Outstanding COntrast performance in ambient dark or light environments
  • Quick response with virtually no motion blur
  • 12-bit output accuracy digital signal processing
  • Nonlinear cubic conversion colour-management system

If you are looking for an upgrade from the same series of monitors have a look at 24.5″ version BVM-E250

Picture Performance

OLED panel
Picture Size (Diagonal)
419.7 mm
16 1/2 inches
Effective Picture Size (H x V)
365.8 x 205.7 mm
14 1/2 x 8 1/8 inches
Resolution (H x V)
1920 x 1080 pixels (Full HD)
Pixel Efficiency
Panel Drive
RGB 10-bit
Panel Frame Rate
48 Hz, 50 Hz, 60 Hz, 72 Hz, 75 Hz *1
Viewing Angle (Panel Specification)
89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1)
Normal Scan
0% scan
Native Scan
Mapping the pixels of the signal to the panel to one-to-one mode, or displaying an SD signal of nonsquare pixels (the number of H pixels of the signal system is 720 or 1440) or a 640 × 480 SD signal of HDMI video by scaling processing of doubling for the V direction and correct aspect ratiofor the H direction and also optimizing and sidplaying a picture by modifying the aperture coefficient value, filter coefficient value, etc.
Under Scan
3% under scan
Over Scan
Mask of 5% over scan portion in the normal scan
Color Temperature
D55, D61, D65, D93, D-Cine *2 , User
Standard Luminance
100 cd/m2 (Preset1 to Preset5)
48 cd/m2 (Preset (D-Cine))
(100% white signal input)
Color Space (Color Gamut)
ITU-R BT.709, EBU, SMPTE-C, D-Cine *3 , E170 Native *4 , S-GAMUT *5
Warm-up Time
Approx. 30 minutes


SDI Input
BNC (x2) Input impedance: 75 Ω unbalanced
Sampling frequency
– Y/Cb/Cr (4:2:2): 148.5 MHz/74.25 MHz/74.25 MHz
– Y/Cb/Cr (4:4:4): 148.5 MHz/148.5 MHz/148.5 MHz
– G/B/R (4:4:4): 148.5 MHz/148.5 MHz/148.5 MHz
– Y/Cb/Cr (4:2:2): 74.25 MHz/37.125 MHz/37.125 MHz
– Y/Cb/Cr (4:2:2): 13.5 MHz/6.75 MHz/6.75 MHz
3G-SDI: 10bit/sample, 12 bit/sample
HD-SDI: 10bit/sample
SD-SDI: 10bit/sample
HDMI Input
HDMI (x1) (HDCP correspondence, Deep Color correspondence)
DisplayPort connector (x1) *6
Option Port
Four (4) ports
Parallel Remote
D-sub 9-pin (female) (x1)
Serial Remote (LAN)
RJ-45 (x1) (Ethernet, 10BASE-T/100BASE-TX)
DC Input
XLR-type 3-pin (male) (x1), 24V DC (output impedance 0.05 Ω or less)


SDI Output
BNC (x1) (monitor output) *7
Output signal amplitude: 800 mVp-p±10%
Output impedance: 75 Ω unbalanced
Transmission distance
3G-SDI: 70 m max. *8
HD-SDI: 100 m max. *8
SD-SDI: 200 m max. *9
DC 5 V Output
Circle 4-pin (female) (x1)


Power Requirements
100 V to 240 V AC, 1.2 A to 0.7 A, 50/60 Hz
24V to 28V DC, 4.5A to 3.9 A
Power Consumption
Approx. 110 W (AC power supply), 100 W (DC power supply) (max.)
Approx. 60 W (AC power supply), 60 W (DC power supply) (average power consumption in the default status)
Inrush Current
(1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 55 A peak, 15 A r.m.s. (240V AC)
(2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 36 A peak, 7 A r.m.s. (240V AC)
Operating Temperature
0°C to 35°C (Recommended: 20°C to 30°C)
32°F to 95°F (Recommended: 68°F to 86°F)
Operating Humidity
0% to 90% (no condensation)
Storage/Transport Temperature
-20°C to +60°C
-4°F to +140°F
Storage/Transport Humidity
0% to 90%
Operating/Storage/Transport Pressure
700 hPa to 1060 hPa
Dimensions (W x H x D) *10
436.0 x 282.4 (266.4)*5 x 214.7 mm
17 1/4 x 11 1/4 (10 1/2)*5 x 8 1/2 inches
Approx. 8.6 kg
Approx. 18 lb 15 oz
Supplied Accessories
AC power cord (1)
AC plug holder (1)
Rack mount bracket (Left, right, each 1)
Rack mount attachement screws (4)
Operation Manual (Japanese, English, each 1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Optional Accessories
BKM-16R Monitor Control Unit
BKM-39H Controller Attachment Stand
BKM-37H Controller Attachment Stand
SMF-700 Monitor Interface Cable
BKM-220D SDI 4:2:2 Input Adaptor (with serial number 2100001 or higher)
BKM-227W NTSC/PAL Input Adaptor
BKM-229X Analog Component Input Adaptor (with serial number 2200001or higher)
BKM-243HS HD/D1-SDI Input Adaptor (with serial number 2108355 or higher)
BKM-244CC HD/SD-SDI Closed Caption Adaptor
BKM-250TG 3G/HD/SD-SDI Input Adaptor (with serial number 7300001or higher)


*[1] 48 Hz, 60 Hz and 72 Hz are also compatible with a frame rate of 1/1.001.
*[2] D-Cine: x = 0.314, y = 0.351
*[3] Chromaticity point of SMPTE RP 431-2 is not covered in full.
*[4] The BVM-E170 individual chromaticity points. The widest color space setting of the signal is reproduced by the BVM-E170. R (x = 0.681, y = 0.319)/G (x = 0.189, y = 0.724)/B (x= 0.141, y= 0.051) (typical)
*[5] For displaying the color gamut of the wide color space mode S-GAMUT, which is available for the F23 or F35 Digital Cinematography Camera.
*[6] The DisplayPort input is available from V1.1.
*[7] The signal from the monitor output connector does not satisfy the online signal specifications.
*[8] When using 5C-FB coaxial cables (Fujikura or equivalent).
*[9] When using 5C-2V coaxial cables (Fujikura or equivalent).
*[10] The values for dimensions are approximate.