Please note this is an Used Audionics WM65 Workstation Mixer. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.
The WM65 workstation mixer is a compact 1U 19” rackmount mixing unit with integral mains power supply. The flexible design of the mixer will enable it to be used in a wide range of configurations and applications.
Two mono and three stereo channels, the mono channels can be internally switched for mic or line level inputs. Mic input gain is selectable via on board headers for 40, 50, 60 or 70dB of gain and an 18V phantom is available for low voltage headsets. All inputs are electronically balanced. Each channel has an associated front panel conductive plastic rotary fader which gives +10dB to “off” gain adjustment.
Four electronically balanced output busses. Each input can be individually selected to the output busses by means of on board switches to give a wide range of setup options, for example, in a conventional mixer setup the outputs would be A, B, Mono and Clean feed. Other examples could include reverse talkback, machine record outputs, aux sends or a monitor mix.
48 LED twin bargraph PPM with 1dB/LED resolution, range ±12dB. The PPM follows headphone selection. Front panel headphone socket with associated volume control. The headphones normally monitor outputs 1 and 2, but a front panel changeover switch allows monitoring of the internal stereo monitor bus which is user programmed by on board switches.
All audio input/outputs are via 3 pin rear panel XLRs, ¼“ Front panel headphone socket