Used Snell IQADA01 Analog Audio DAUsed Snell IQADA01 Analog Audio DA

Used Snell IQADA01 Analog Audio DA

This Used Snell IQADA01 Analog Audio DA is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£50.00 exc. VAT

SKU: IQADA01 Categories: , Tag:

Please note this is an Used Snell IQADA01 Analog Audio DA. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The Snell IQADA01 Analog Audio Distribution Amplifier – 2 x 7 Outputs

The IQADA01 provides dual analog inputs with up to seven outputs per input, or a single analog input with up to 14 outputs.

Features:

  • Configurable for 1 input to 14 outputs, or 2 inputs to 7 outputs per input
  • Very low THD+N
  • Output gain remotely adjustable from +24dB to -24dB with fine control
  • +24 dBu headroom
Inputs and Outputs
Signal Inputs Analog
2 channels balanced via 25 way Dtype connector
Signal Outputs Analog
7 per input channel balanced via 25 way
D-typeconnector
Note: Configurable for 1 input to 14 output operation
Controls
Mode: Single, Dual channel
Fine gain adjustment: ±0.5 dB additional to the coarse gain level
Functions Available via RollCall
Gain (separate L and R): +24 dB to -24 dB in 0.5 dB steps
Silence detect: Level adjustable, -15 to -25 dBu in 1 dB steps
Warning timer: 1 to 60 s (for silence detection)
Reporting (* also Logged)
Silence detected *Silence Detected (L and R)
RollTrack controls: On/Off, Index, Source, Address, Command, Status, Sending
RollTrack:
Unused
Input 1 Present
Input 1 Silent
Input 2 Present
Input 2 Silent
Analog input/output level
Headroomsetto: +24 dBu (17.5V pk to pk) Gain at Unity
Analog input Impedance: 10 k Ohms (600 Ohm Option)
analog output Impedance: Balanced<50ohms
Total harmonic distortion + noise
< -94 dBu (0.002%) at 700 Hz, 24 dBu input and 0 dB gain
Gain accuracy < ±0.2dB @ 0dB
gain error (channel 1 to channel 2) <±0.2 dB @ 0d B
Common mode rejection < -70 dB (20 Hz to 20 kHz)
Frequency response ±0.1dB (20 Hz to 20 kHz with reference to 1 kHz)
Channel 1 to 2 crosstalk <-110 dB at 1 kHz
Headroom (in and out): 24 dBu (Note: a maximum of 3 outputs can be driven at 24 dBu when using 600 Ohm terminations)
Power Consumption
Modulepower consumption
6.5W Max (A Frames)
4.5PR (B Frames