Used Snell IQAVDR SD Serial DA with EqualiserUsed Snell IQAVDR SD Serial DA with Equaliser

Used Snell IQAVDR SD Serial DA with Equaliser

This Used Snell IQAVDR SD Serial DA with Equaliser is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£75.00 exc. VAT

SKU: IQAVDR Categories: , Tag:

Please note this is an Used Snell IQAVDR SD Serial DA with Equaliser. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The Snell IQAVDR is a broadcast quality 10/4-output distribution amplifier with adjustable gain, and equalization.

An on-board processor identifies the incoming signal standard/format. Automatic gain and equalization adjustment is available for composite signals.
The input is a loop-through and fully differential. Equalization for common cable types and a black level clamp may be enabled by simple link changes.
The bandwidth of 35 MHz enables it to be used with HDTV component inputs.

Features

  • Balanced Loop-through input
  • 35 MHz bandwidth
  • Adjustable gain and equalization
  • Equalization for RG59U/Belden 8263 or PSF1/2/Belden 8281 (link selectable)
  • Black level clamp (link selectable)
  • Full RollCall remote control and signal identification
  • Sync and burst level warnings
  • Automatic gain control (AGC) with respect to sync height
  • Automatic equalization (ACC) with respect to burst height
Frequency Response
(Without Equalization) ……..10 kHz – 10 MHz ± 0.1dB / 10 MHz – 30 MHz ± 0.2 dB / 35 MHz <-1 dB
Differential Gain ……………..Unity Gain – Better than 0.2%
Differential Phase …………..Unity Gain – Better than 0.2°
Signal/Noise Ratio …………..10 kHz – 7 MHz – Better than -66 dB (Unweighted)
Linearity…………………………Better than 0.1%
50 Hz tilt K50Hz………………Better than 0.1%
Output D.C. ……………………< 90 mV
Output Return Loss …………better than 33 dB to 10 MHz, 26 dB to 30 MHz
Maximum Output Level…….2.4 V pk to pk @ 20 MHz into 75 ohms
Insertion Delay ………………20 ns
Y-C Gain/ Delay inequality..< 1%, < 1 ns
K2T, KPB ………………………Better than 0.1%
Max. Input Level ……………..+ 6 dB
CMRR ………………………….Better than 60 dB at 50 Hz,
40 dB 50 Hz to 8 MHz
Input Return Loss (Powered)
better than 36 dB to 10 MHz,
30 dB to 30 MHz
Input Return Loss (Un-Powered)
better than 33 dB to 30 MHz
Input Impedance……………..> 22 k ohms
Headroom………………………+6 dB
Output Impedance …………..75 ohms ±1%
Gain………………………………Unity ±1% as supplied
200 m ……………………………-1 dB typical at 25 MHz
300 m …………………………..-1 dB typical at 15 MHz
AGC ……………………………..[On/Off] – All recognized SD Sources
ACC ……………………………..[On/Off] – Composite Sources Only
Functions Available via RollCall™ Only
Signal Identification …………Line Standard – NT
SC, 525 Mono,
PAL, 625 Mono, HD(720),
HD(1080), None, Unknown
Selectable Clamp
Signal level…………………….Sync and Burst amplitude ±10%
Logging …………………………Signal Level Warning, Line Standard, Burst level warning
Clamp Rejection ……………..8 dB typical at 50Hz
Power Consumption
Module Power Consumption
3.5 W max
EMC Performance Information
Environment ………………….Commercial and light industrial E2
Peak Mains Inrush Current following a 5 second mains interruption …………………………………….No mains input
Performance Information ….Immunity to conducted common-mode RF interference (EN 55103-2 immunity phenomenon I6):
Interference is just visible on critical picture material when a video input or output is subjected to modulated RF at a level of 3 V