Used Snell IQBDA7S Analog Audio DAUsed Snell IQBDA7S Analog Audio DA

Used Snell IQBDA7S Analog Audio DA

This Used Snell IQBDA7S Analog Audio DA is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£50.00 exc. VAT

SKU: IQBDA7S Categories: , Tag:

Please note this is an Used Snell IQBDA7S Analog Audio DA. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The Snell IQBDA7 Analog Audio Distribution Amplifier

The IQBDA7 Analog Audio Distribution Amplifier has a single input with seven outputs. The IQBDA7S Analog Audio Distribution Amplifier has dual inputs with seven outputs per input.
All modules are available in RollCall (-R) and non-RollCall versions. The RollCall versions use an electronic gain control of between -24 dB and +30 dB in 0.5 dB steps, which is also available from the front panel. The non-RollCall versions gain is adjustable between –6 dB and 24 dB in 6 dB steps using jumper links, and also incorporates a fine gain adjust of -6 dB to +6 dB using a potentiometer. In both cases the maximum signal in or out (headroom) is 24 dBu.
The balanced transformerless analog audio connections are via a 25D connector.

Features:

IQBDA7 accepts one analog audio input and provides seven outputs

  • Very low THD+N
  • Output gain adjustable from -6 dB to +24 dB by links
  • Additional –6 dB to +6 dB gain by potentiometer
  • Output gain adjustable from -24 dB to +30 dB (IQBDA7-R) via RollCall
  • +24 dBu headroom
IQBDA7S accepts two analog audio inputs and gives seven outputs per input
  • Can be linked to provide 14 outputs from 1 input
  • Very low THD+N
  • Output gain adjustable from -6 dB to +24 dB by links (IQBDA7S)
  • Additional –6 dB to +6 dB gain by pot (IQBDA7S)
  • Output gain adjustable from -24 dB to +30 dB (IQBDA7S-R) via RollCall
  • +24 dBu headroom
Inputs and Outputs
Signal Inputs
Analog ……………………………1 channel balanced via D type connector
Card Edge and RollCall Functions
Indicators
Silence …………………………..<=20 dBu for 40 seconds
Card Edge Controls (also available via RollCall – R version only)
Gain (-0 version) ……………..-6 dB to 24 dB in 6 dB steps (jumper links). -6 dB to +6 dB variable control
Gain (-R version) -24 dB, -18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB, +18 dB, +24 dB, +30 dB via card edge rotary switches.
Signal Outputs
Analog ……………………………7 balanced via D type connector
Functions Available via RollCall™ Only (- R version only)
Gain……………………………….-24 dB to +30 dB in 0.5 dB steps
Specifications
Analog Input/Output Level…Headroom set to: 24 dBu (17.5 V pk to pk) Gain at Unity
Analog Input Impedance …..10 k ohms
Analog Output Impedance ..<50 ohms
Total Harmonic Distortion+Noise / Less than 0.005% at 700 Hz / 24 dBu input and 0 dB gain
Noise Floor (-0 version)…….Better than –119 dBF’s, 0 dB gain (20 Hz to 20 kHz)
Noise Floor (-R version) ……Better than –105 dBF’s, 0 dB gain (20 Hz to 20 kHz)
Gain Accuracy…………………Better than ±0.2 dB w.r.t. 0 dB
Common Mode Rejection….Better than -60 dB, 20 Hz to 20 kHz
Frequency Flatness………….Better than +0.1 dBu to -0.3 dBu (20 Hz to 20 kHz with reference to 1 kHz)
Headroom (in and out) 24 dBu
Power Consumption
Module Power Consumption
7.6 W max (-R versions)
7.1 W max (-0 versions)