Used Snell IQDAVM SDI to Comp & Analog Audio DAUsed Snell IQDAVM SDI to Comp & Analog Audio DA

Used Snell IQDAVM SDI to Comp & Analog Audio DA

This Used Snell IQDAVM SDI DA with Audio and Composite Video Monitor is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£100.00 exc. VAT

SKU: IQDAVM Categories: , Tag:

Please note this is an Used Snell IQDAVM SDI DA with Audio and Composite Video Monitor . ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

Snell IQDAVM SDI DA with Audio and Composite Video Monitor

The IQDAVM accepts a serial 4:2:2 input to provide up to four equalized and re-clocked outputs, three monitoring composite outputs and four embedded audio analog outputs. On-screen audio ‘confidence’ displays of four embedded audio channels are provided on the -M version.

Features:

  • Up to four re-clocked serial 4:2:2 outputs
  • Three monitoring composite PAL/NTSC/PAL-N outputs
  • Four analog audio outputs or 2 stereo pairs
  • Balanced audio output level adjustable +12 dBu to + 24 dBu for 0 dB FS input (-D version)
  • Unbalanced audio output level adjustable 1 Volt pk-pk to 4.5 Volts pk-pk into >50 k ohm, for 0 dB FS input (-B version)
  • Audio selection from any embedded channel pair
  • 20-bit digital-to-analog audio conversion, -95 dB T HD+N typical (Full Scale)
  • Audio polarity invert
  • Embedded audio presence indication
  • On screen display of audio level and status (-M versions only)
  • Non-audio ancillary data presence indication
  • EDH error detection and reporting
  • Test signal generator (Color Bars/Black and –20 dBF S Tone/Silence)
  • Automatic 525/625 line detection and no valid signal indication
  • Card edge and RollCall remote control
SDI Input Return Loss ……..Better than –15 dB at 270 MHz
Input Cable Length ………….> 200 m of PSF1/2
SDI Output Return Loss …..Better than –15 dB at 270 MHz
Composite Video Output ….1 V pk-pk into 75 ohm (EBU Bars)
Internal Processing………….8-bit composite encoding with 9-bit oversampled DAC’s
Video Signal
Luminance Frequency Response 0 – 4 MHz +0.1 dB, -0.5 dB
Chrominance Frequency Response 1.6 MHz or 2 MHz (selectable) – 6 dB
Video Signal/Noise Ratio ….Better than – 68 dB (weighted – flat field)
Better than –62 dB (weighted –ramp)
Differential phase…………….< 2°
Differential gain ………………< 1 %
Processing Delay…………….approx. 2 μs
Audio Signal
THD+N at 24 dBu ………….. Better than -80 dB (0dBFS, 1 kHz)
Linear Freq. Response …… +0.1 dB , – 0.3 dB (20 Hz to 20 kHz w.r.t. 1kHz)
Conversion …………………… 20-bit
Sampling ……………………… 48 kHz Synchronous to D1 video stream
Dynamic Range …………….. Better than 100 dB (Balanced)
Dynamic Range ……………. Better than 98 dB (Unbalanced)
Output Level (Balanced) …. Level Adjustable +12 dButo +24dBu
Output Level (Unbalanced) Adjustable 1 V pk-pk to 4.5 V pk-pk into >50 k ohm, for 0 dB FS input
Output Impedance (Balanced) 25 ohm Nominal
Output Impedance (Unbalanced) 75 ohm Nominal
Power Consumption
Module Power Consumption
8.5 W max (balanced versions)
6.5 W max (unbalanced versions)
Used Snell IQDAVM SDI to Comp & Analog Audio DA - Diagram
Used Snell IQDAVM SDI to Comp & Analog Audio DA – Diagram