Used Snell IQMDA00 HD-SDI DA and down converterUsed Snell IQMDA00 HD-SDI DA and down converter

Used Snell IQMDA00 HD-SDI DA and down converter

This Used Snell IQMDA00 HD-SDI DA and down converter is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£800.00 exc. VAT

SKU: IQMDA00 Categories: , Tag:

Please note this is an Used Snell IQMDA00 HD-SDI DA and down converter. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The Snell IQMDA00 HD/SD-SDI distribution amplifier and HD-SDI monitoring downconverter

The IQMDA00 is an HD/SD-SDI distribution amplifier and HD-SDI monitoring downconverter.
This module takes HD-SDI streams and produces four re-clocked HD-SDI outputs. It also converts the input signal to same frame-rate SD-SDI outputs for monitoring. Output options include 4 x HD-SDI and 3 x SD-SDI. One group of audio can also be carried through from the HD inputs to the SD outputs.
This module can also be used to distribute SD-SDI signals to SMPTE 259M-C, providing 7 outputs from one input.

Features:

  • An HD-SDI monitoring down-converter to allow compact low-cost, low-power monitoring solutions for HD environments
  • Standards supported:
  • HD-SDI to SMPTE292M
  • SD-SDI to SMPTE259M-C
  • A distribution amplifier for HD-SDI signals with SD-SDI monitoring capability
  • A distribution amplifier for SD-SDI signals with 7 x SD-SDI outputs
  • Audio capability means that a complete Audio/Video monitoring solution is possible
  • Supports one output group of embedded audio channels with input audio group selection
  • Monitoring output aspect ratio may be set to letterbox, anamorphic or center cut out picture modes
  • Signal loss detection
  • Maintains the input frame-rate for the output signal
  • RollCall remote control and monitoring compatible
Signal Input
Electrical ……………………… 1.5 Gbit/s HD-SDI, SMPTE 292M 270 Mbit/s SDI, SMPTE 259M-C
Connector / Format ………… BNC/ 75 Ohm panel jack on standard S&W connector panel
Input Cable Length…………. Up to 140 m Belden 1694A @ 1.5 Gbit/s
Up to 350 m Belden 1694A @ 270 Mbit/s
Return loss……………………. > -15 dB
Distribution Outputs
Electrical ……………………… 1.5 Gbit/s HD-SDI, SMPTE 292M, 270 Mbit/s SDI, SMPTE 259M-C
Connector / Format ………… BNC/ 75 Ohm panel jack on
standard S&W connector panel
Outputs ………………………… 4
Return loss ……………………….. > -15 dB
Downconverter Outputs
Electrical ………………………. 270 Mb/s SD-SDI SMPTE 259M-C including one group of embedded audio, delayed to match the HD/SD video processing delay
Connector / Format ………… BNC/ 75ohm panel jack on standard S&W connector panel
Outputs ………………………… 3
Output Return Loss ………… > -15 dB
Indicators
Power ………………………….. OK
CPU …………………………….. OK
Status ………………………….. OK (Green) / Warning (Yellow) / Error (Red)
Available Conversions
Input
1125(1080)/29.97i or sF
1125(1080)/25i or sF
750(720)/59.94P
750(720)/50P
625(576)/25i
525(483)/29.97i
Output
525(483)/29.97i
625(576)/25i
525(483)/29.97i
625(576)/25i
625(576)/25i
525(483)/29.97i
RollCall Control
1. Control
2. Aspect ratio for monitoring outputs letterbox, anamorphic, center cut out
User Memories………………. 16 x Save / Recall / Rename Input audio group selection Groups 1 to 4
Reporting ……………………… Input format(including unknown), input loss, CRC error
Logging …………………………
Input Status
Input Standard
Convert
CRC/EDH
CRC/EDH total
RollTrack Controls………….. On/Off, Index, Source, Address, Command, Status, Sending.
RollTrack Outputs …………..
Unused
SD Output Video Delay
Input Present
Input Loss
Specifications
Processing ……………………. 10 bit
Under/over shoot …………… <10%
Linearity ……………………….. ±1 LSB
S/N ……………………………… > 65 dB
Color Space ………………….. Transmission matrix conversion from SMPTE274 to ITUR-601
Y/C delay ……………………… < 10 ns
SD Output Delay ……………. 1 output Frame
625(576)/25i = 40 ms
525(483)/29.97i = 33 ms
No conversion = 0 ms
With SD inputs = 1.2 μs
Horizontal Response (anamorphic) ±0.2 dB to 5.4 MHz, > 45 dB stop band attenuation
Vertical Response ………….. > 40 dB stop band attenuation
Power Consumption
Module Power Consumption 8.5 W Max
Used Snell IQMDA00 HD-SDI DA and down converter