Used Snell IQSYN00 HD-SDI Frame SyncUsed Snell IQSYN00 HD-SDI Frame Sync

Used Snell IQSYN00 HD-SDI Frame Sync

This Used Snell IQSYN00 HD-SDI Frame Sync is in a very good condition and in full working order as well it comes with 3 months warranty. We have multiple units available all in full working order and in very good condition.

£250.00 exc. VAT

AVAILABLE

SKU: IQSYN00 Categories: , Tag:

Please note this is an Used Snell IQSYN00 HD-SDI Frame Sync. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The SnellI QSYN00 SDI frame synchronizer with embedded audio processing

A powerful SDI video synchronizer with advanced embedded audio handling. Video and audio proc. amp capability makes this module ideal for SD lines-in applications. All audio manipulation is at the channel-level suiting discreet surround and multi-lingual use. Its firewall capability ensures continuous audio and video output even when the input signal fails.
A dual SDI input allows this synchronizer to take signals from either of two paths. This can be used for handling main and redundant feeds, or it can be used with a composite decoder such as the IQDEC00 to provide analog and digital alternative inputs.
The second input also allows split operation, with video taken from one input and embedded audio from the other.

Features:

  • SDI synchronizer with tracking audio delay
  • Firewall for video and processed PCM audio to provide a continuous output
  • Transparent to Dolby E / non-PCM audio
  • Handles up to 24 bit embedded audio present on the incoming SDI stream, and processes audio for re-insertion at 20 bits
  • Eight channel audio processor with channel level manipulation
  • Channel level (Sub-frame) routing
  • 4 off 4 channel assignable audio mixers
  • Video proc-amp (gain, saturation, black level)
  • Audio proc-amp and delay
  • Flexible audio delay including common fixed delay and tracking delay
  • Tracking audio delay of up to 0.5s which seamlessly tracks the video delay or external RollTrack / GPI inputs
  • Up to 3 frames of video delay in delay mode
  • RollCall control and monitoring compatible

Signal Inputs

Digital Video ……………………Up to 2 x SDI (BNC)
Standards……………………….SMPTE 259M-C-1997, SMPTE 272M-A-1994
Video reference……………….Composite video (BNC)

Signal Outputs

Digital Video ……………………SDI x 2
Standards……………………….SMPTE 259M-C-1997, SMPTE 272M-A-1994

Control Interface

GPI ………………………………..1x Closing contact I/O interface

Card Edge Controls

NONE

Card Edge Indicators

SDI Input Loss ………………..Loss = Off, Good = Green
SDI Input Error ………………..Yellow (Unused input not at current operating standard)
Reference Loss
CPU running / Power ……….One green LED, flashing = OK

RollCall Functions

Audio Controls

Audio extraction select……..SDI input 1/2/Follow Video Control Set headroom …………………4 to 24 dB in 1 dB steps
Set audio detector thresholds
High and low levels, time delay
Input side control proc. – audio gain and polarity
Independent Gain, Mute, Polarity control over de-embedded channels. ±18 dB in 0.1 dB steps.
Channel routing ………………Output channels routed from SDI 8
embedded channels from any group, test tone and silence
Output side control proc. – gain and polarity
Independent Gain, Mute, & Polarity control over embedded output channels. ±18 dB in 0.1 dB steps.
Lock……………………………….Control to select the clock source from the output side of the synchronizer – Video, Input 1, internal
Global delay offset …………..up to +1.5 s in 1 ms steps, common to all processed audio.
Variable audio delay control source
Up to 0.5 s from RollTrack + GPI + video synchronizer
Tone frequency, amplitude & Ident
2-channel tone generator. 100 Hz to 15 kHz in 100 Hz steps.

Tone Setup:

Frequency ………………………100 Hz to 15 kHz in 100 Hz steps
Channel Ident………………….0.5 s interruption every 2 s

Video Controls

Select primary input …………1/2 RGB Legalizer…………………On/ Off
Black Level……………………..± 100 mV in 0.8 mV steps
Hue Adjust………………………±180°
Cb Gain Offset ………………..±1 dB in 0.1dB steps
Cb Offset ………………………..±50 mV in 1 mV steps
Cr Offset…………………………±50 mV in 1 mV steps
Y Min/Max Clipper value …..-50 mV to +50 mV and 635 mV to 765 mV in 1 mV steps
C Min/Max Clipper value …..±300 mV to ±398 mV in 1 mV steps
Y/C Timing …………………….± 592 ns in 148 ns steps
Picture position ……………….± 592 ns in 148 ns steps
Luminance Gain ………………± 6 dB
Chrominance Gain …………..± 6 dB
Genlock Mode …………………Free-run / Genlock / Primary SDI
(delay mode) Genlock H Phase …………….± 32 s in 37 ns steps
Genlock V Phase …………….± 262/312 lines in 1 line steps Video Horizontal Delay……..+1 Line in 37 ns steps
Video Vertical Delay…………+1 Frame in 1 line steps Video Delay Frames…………0 to +2 frames

Other Controls

Pass vertical data…………….On/Off (lines selectable 7/11 to 23/22 & 320/274 to 335/284)
Preset Unit ……………………..Returns initial settings to default
Pattern Select………………….100% Bars / 75% Bars / Multiburst /
Black / Animated Bars / Pulse + Bar
User Memories………………..Name, clear, save and read 8 user memories
Default Video Output………..Pattern / freeze/ run through Default Audio Output………..Silence
Caption Output ……………….On / Off
Caption Generator……………Programmable up to 19 characters
GPI/O set-up …………………..May be attached to any memory function / polarity
Reporting * also Logged
EDH (for selected input)……*EDH Error / *Error-Time / *EDH Error-Seconds
No SDI……………………………*No input present
No reference …………………..*No reference present
Reference error ……………….Standard different to selected input
Input ancillary error ………….ANC Error / ANC Error-Seconds

Input error Unused input not at current operating standard

Report Embedded Audio Data
Report audio data pairs on input and output SDI
Audio Silence, High Level, Low Level, Overflow
For processed audio channels only
RollTrack Input
Delay ……………………………..Audio delay – Fixed, RollTrack + fixed, Internal Sync + Fixed
RollTrack Output
Delay ……………………………..Current video/audio delay Reference state……………….Ref Lost, Ref Present, Ref error
[error: different standard to input – input has precedence
Input state ………………………Selected Input: Input Present, Input
Missing, Standard 525, Standard 625
Input 1: Input Present, Input Missing, Standard 525, Standard 625
Input 2: Input Present, Input Missing, Standard 525, Standard 625
GPI 1 Low, High, Inactive Embedded Audio state……..De-embed 1-8 Lost/Present

Specifications
Video Internal Processing …4:2:2 with 10 bit data paths
Serial Input Return Loss …..Better than 15 dB to 270 MHz
Maximum Input Cable length > 200 m (PSF1/2 or equiv. cable)
Serial Output Level…………..800 mV ±5%
Output Overshoot…………….< 70 mV
Output Return Loss ………….Better than -15 dB to 270 MHz
Output Jitter…………………….< 0.2 UI (with 10 Hz High pass filter selected on 601 monitor)
Reference Return Loss …….Better than -35 dB to 5.8 MHz
Reference Input Level ………1 Vp-p ± 3 dB
Minimum Delay ………………6μs
Synchronize Hysteresis Window 0.5 – 1μs
Delay (Synchronize Mode)..Sync delay + 0, 1 or 2 Frames
Delay (Delay Mode) …………6μs – 3 Frames + 5.5μs
Power Consumption
Module Power Consumption 7 W max
Used Snell IQSYN00 HD-SDI Frame Sync - Diagram
Used Snell IQSYN00 HD-SDI Frame Sync – Diagram