Used Sonifex RB-SS10 10 Way Stereo Analogue Source Selector/MixerUsed Sonifex RB-SS10 10 Way Stereo Analogue Source Selector/Mixer

Used Sonifex RB-SS10 10 Way Stereo Analogue Source Selector/Mixer

This Used Sonifex RB-SS10 10 Way Stereo Analogue Source Selector/Mixeris in a very good condition and in full working order as well it comes with 3 months warranty.

£100.00 exc. VAT

SKU: RB-SS10 Categories: , Tag:

Please note this is an Used Sonifex RB-SS10 10 Way Stereo Analogue Source Selector/Mixer. ES Broadcast carefully tests all used equipment prior to sale, and offers a three-month warranty. Images shown are for illustrative purposes only and may not be of the specific model offered for sale. Accurate pictures of this model are available on request.

The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources.

There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear panel. To stop accidental front panel selection there is a remote input to inhibit the front panel buttons.

Two of the stereo inputs are on XLR so that you can hot-plug audio sources, e.g. portable recorders. As well as being able to act as a source select module, the RB-SS10 can act as a mixer, by enabling the mix mode (using the remote input).

The gain for left and right inputs can be individually adjusted by using the pre-set potentiometers on the front panel. As well as routing the selected audio signal, the unit will also route a remote signal input through the remote connector to the selected input source, for starting external audio equipment such as a CD player.

Audio Specification

Input Impedance: 20kΩ bridging
Output Impedance: <50Ω
Max Input Level: +28dBu
Max Output Level: +28dBu
Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Input Gain Range: Adjustable 8dB loss to 20dB gain (L & R adjust) via front panel adjustable preset potentiometers
Common Mode Rejection: >66dB typically
Noise: -96dB unity gain ref +8dBu
Max Headphone Output Level: +12dBu

Connections

Inputs: 4 x XLR 3 pin female (2 x stereo) (balanced, can be unbalanced)
2 x 25 way D-type socket (female) (4 stereo balanced channels on each)
Outputs: 2 x XLR 3 pin male (stereo balanced, can be unbalanced)
Remote Start I/O: 25 way D-type plug (male)
Remote Select/Switch Inputs: 25 way D-type socket (female)
Status Outputs: 25 way D-type socket (female)
Mains Input: Filtered IEC, 110V-120V, or 220-240V
switchable, fused, 6W maximum
Fuse Rating: Anti-surge fuse 160mA 20 x 5mm (230VAC)
Anti-surge fuse 315mA 20 x 5mm (115VAC)

Equipment Type

RB-SS10: 10 way stereo analogue source selector/mixer

Physical Specification

Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed): 58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight: Nett: 1.5kg  Gross: 2.0kg
Nett: 3.3lbs Gross: 4.4lbs